Thread Check Catalog 2023

SURVEILLANCE MASTERS

DEPTH MICROMETER MASTERS

MODEL DM • Depth micrometer masters - models DM are available in both inches and millimeters. • Inch range is .500" to 5.500" in 1.00" steps +/- .0001". • Metric range is 12.5 to 137.5mm in 25.0mm steps +/- .0025mm. • Depth micrometer masters are case hardened, stabilized, ground and lapped. DM-1E-English - .500 to 5.500" in 1.00" steps. Tolerance is +/- .0002". - $2739.00 DM-1M-Metric - 12.50 to 137.50mm in 25.00mm steps. Tolerance is +/- .005mm. - $2739.00 Long Form Calibration - $226.00 MODEL ADM • Depth micrometer masters - models ADM are available in both inches and millimeters. • Inch range is .500" to 5.500" in 1.00" steps +/- .0001" and optional riser 6.5" to 11.50" in 1.00" steps +/-.0002". • Metric range is 12.5 to 137.5mm in 25.0mm steps +/- .0025mm and optional riser 162.5 to 287.5mm in 25.0mm steps +/- .005mm. ADM-English - .500" to 5.500" in 1.00" steps. Tolerance is +/- .0001"- $3360.00 ADM-E Riser - increase depth range x 2. 6.50" to 11.50" in 1.00" steps. Tolerance is +/- .0002" - $967.00 ADM-M-Metric-21.50 to 137.50mm in 25.0mm steps. Tolerance is +/- .0025mm - $3360.00 ADM-M Riser - increase depth range by x 2. 162.5 to 287.50mmin 25mm steps. Tolerance is +/- .005mm - $967.00 Depth Micrometer Masters are used to calibrate depth micrometers. The depth micrometer master is superior to gage block calibration because they eliminate the requirement to stack gage blocks. Using a depth micrometer master is faster and more efficient for inspecting the linear range of the tool. MODEL 01-1 up to 1.0"/25.0mm Micrometer set masters are used to calibrate and set micrometers. The master is superior to gage block calibration because they eliminate the requirement to stack gage blocks. Using micrometer masters is faster and more efficient for inspecting the linear range of the tool. Micrometer set masters indicate the wear on the micrometer anvil because they replicate how the micrometer is used. • Micrometer set masters 01-1 are available in both inches and millimeters. • Inch range is .10" to 1". It is hardened, stabilized, ground and lapped to +/- .0001". • Metric range is 0 to 25.00mm diameter. It is hardened, stabilized, ground and lapped to +/- .0025mm. • Micrometer set master has two odd steps at .512" and another at .762". These steps allow checking of parallelism of the micrometer anvils. • Supplied in stainless steel to reduce wear and prevent rust. MSM-01-1E-English - 0 to 1.0" diameter in stainless steel to reduce wear and prevent rust. Hardened, stabilized, ground and lapped to +/- .0001". - $721.00 MSM-01-1M-Metric - 0 to 25.00mm diameter in stainless steel to reduce wear and prevent rust. Hardened, stabilized, ground and lapped to +/- .0025mm. - $721.00 MICROMETER SET MASTERS - MODEL 01-1 up to 1.0"/25.0mm Long Form Calibration - $225.00 Wood ADM Storage Box - $260.00 Wood ADM & Riser Storage Box - $320.00

Long Form Calibration - $90.00 Plastic Storage Case - $60.00

Phone 631-231-1515 | Fax 631-231-1625 | www.threadcheck.com | info@threadcheck.com | Thread Check Product Catalog 169